SV510V Heavy Duty Solids Pump

The SV510 Heavy Duty Solids Pump is capable of capturing high-density slurries via a strong 26.5”Hg+ (90 kPa) vacuum combined with high-velocity airflows. It has a throughput capacity of up to and in excess of 90 m³/hr (396 USGPM) @ SG1.0 of various materials via vacuum load or top load gravity feed.

The SV510 synchronised pumping solution features 2 x SV510 pumps in a dual pump configuration, doubling the effective transfer rate. Parallel pump operation with common suction & discharge lines, either manual or fully automatic controls, allows for a delivery rate of upwards of 180 m³/hr @ SG1.0 for 2 x SV510 units.

The SV510 is supplied with an LPD Variable Control Low Pressure Discharge option, allowing operators to have complete control over the discharge cycle pressure. This ensures the use of only the necessary pressure to move material without compromising performance, reducing overall energy consumption and increasing safety by reducing pressure in pipelines and hoses.

In one notable project, ZAR Lynx was tasked with the removal of heavy sediment from a municipal water storage tank at a water treatment facility. The tank measured approximately 44.8m x 57.5m x 6m and contained around 140 tonnes of sludge and sand.

• Case Study: Municipal Water Tank Cleaning (Malaysia)